X-Ray SMD Parts Reel Counter XC1000
A Leader in the Intelligent x-ray Equipment Many years experience in this field, Makes us understanding the customers’ demand and requirement very well!
X-Ray SMD Parts Reel Counter XC1000 introduction-counting tray within 5-12 Seconds
X-ray counting machine, perfect eliminates the problem of traditional rotary chip counting machine, 1. Long time for manual counting; 2. High labor cost for input.
The X-ray Component counting machine can measure hundreds to 100,000 disk chips about 12 seconds, and the disk diameter ranges from 180 mm to 430 mm. The conveyor belt movement provides a 100% automatic detection environment.
X-Ray SMD Parts Reel Counter XC1000 Features:
- Automatic component recognition – Automated parameter setting and counting of unknown components
- Intelligent database on site
- Verification of results through plausibility check;a prerequisite for automation.
- Counting of component chains:new software counts with the highest precision big building parts in high volume packaging
- Dry pack:special software function recognizes interference factor and the evaluation is only directed at the building parts
- Quad-Count-Fourfold counting:we count four bundles in 12 seconds with a scan
- Stick & Tray:high precision counting in<12 seconds
- Order counting (exact use per order)
- Inventory mode
- 2D inspection for electronic components and assembled circuit boards
- Individuals solutions (customized)
- Increased productivity based on precise inventory knowledge
- Planning safely based on precise actual inventory;
- Reduction of downtime and multiple setting-ups;
- Post-order calculation of the used material immediately after completion of the process;
- Reliable delivery terms,increased customer satisfaction.
- Cost reduction based on automated component counts
- No special procurement and cost intensive additional purchases;
- Inventory reduction based on real stock;
- Reduction of capital tie-up;
- Optimized storage;
- No safety stock levels and scrapping.
Related Article: x ray knowledge
X-Ray SMD Parts Reel Counter XC1000 Technical Parameters
|Detectable component||Resistance, capacitance, inductance, crystal, LED, diode, triode, multi-pin IC, etc.|
|X-RAY launching tube Maximum tube voltage||30-80kV|
|X-RAY launching tube Maximum tube current||0.5mA|
|Inspection Area||150-380MM Diameter|
|Components Size||Geometric magnification：150 X
|Detector Image Speed||Min 01005|
|Max Number of Components||50K|
|Stick & Tray Counting Time||High Precision 5-15 seconds / disk|
|Other Function||Automatic feeding and discharging, automatic test mode- Smart mode|
|Software||Supports arbitrary format SPC statistics, images and results can be saved automatically|
|Radiation leakage||＜ 1 uSv/Hour|
|Tray type||1 reel/4 reels|