Why Inspect Components IC?

Quality is First!

Component placement inspection has become even more critical over the past decade due to package sizes getting smaller and smaller. The key to a successful yield improvement strategy is understanding these placement defects and creating a proactive approach to process control.

Learn why you should Inspect your Components IC

First sample PCB test-Use x ray machine to detect quality problems and control quality issues from the root cause.

AOI and SPI is important for PCB surface, But for PCB inside quality, X ray machine is necessary for factory that requires quality.

If it can control quality problem at the first, rework process can be save a lot of time, repair material and manpower.

For repair, recommend ZM R7830A BGA rework station,  Flextronics, DELTA, SONY, and so on are using it, demo video: https://youtu.be/j6lcbA-bB8o

For ROI of x ray machine, it can’t be calculated, SMT PCB is mass production, PCB value is difficult to estimate, and closed tube x Ray machine can be used for 12-15 years.

The article is reproduced in ASC International

Family of Industrial X-ray inspection machine & BGA rework station

Last Article: Method for detecting electronic components quickly

Next Article:x ray inspect PCB and SMT patch module

TSI Mexico use Seamark x ray machine

Persang Alloy Industries X ray 6600 for PCB

Maybe you still are interested inSolder paste printing defects and solutions in SMT chip processing process

Advantages of X-ray SMD counter